Wake Boat Parts

Wake Boat Parts

Keep your boat performing like new.  Buy OEM Boat Parts from Malibu, Axis, Nautique, Supra, & Moomba.

Filters

Filters

$
to
$
360 products
Sort by
Sort by
A gray Indmar INJECTOR FUEL 4 BAR (EV6) - 636049 connector with rubber rings on both ends, shown on a 1-inch grid, measures about 3 inches long.
Indmar INJECTOR FUEL 4 BAR (EV6) - 636049
$186.20
A black plastic Indmar CAP HVS (HIGH VOLTAGE SWITCH) – 556345GM, with blue screws, from Indmar. The Indmar CAP HVS (HIGH VOLTAGE SWITCH) - 556345GM is a black automotive distributor cap with five cylindrical spark plug wire connectors, shown from above on a white background, engineered by Indmar for reliable high voltage performance.
Indmar CAP HVS (HIGH VOLTAGE SWITCH) - 556345GM
$189.99
A round, white plastic mounting base holds a blue Indmar ROTOR HVS (HIGH VOLTAGE SWITCH) - 556346 in the center, next to a sealed bag of screws.
Indmar ROTOR HVS (HIGH VOLTAGE SWITCH) - 556346
$29.95
The Indmar SENSOR CRANK 5.7L - 556293 features a black sensor with an orange ring and metal bracket, designed for 5.7L engines by Indmar, displayed on a plain light surface.
Indmar SENSOR CRANK 5.7L - 556293
$304.00
A black Indmar SENSOR MAP MONOVALVE (MINI)/5.7 & 8.1 & 6.0 – 556102 features a barcode, white label, two mounting holes, and a cylindrical connector, set against a plain light background.
Indmar SENSOR MAP MONOVALVE (MINI)/5.7 & 8.1 & 6.0) - 556102
$238.99
A close-up of a metal bolt, typically found near the Indmar SENSOR KNOCK - 556015 PCM R020027 on Indmar 5.7 L engines.
Indmar SENSOR KNOCK - 556015 PCM R020027
$149.04
The Indmar TANK HIGH FILL F/W 6.OL - 866102 is a translucent plastic coolant reservoir with two pipe connections and a ribbed surface, ideal for supercharged engines. Brand: Indmar. Shown isolated on a white background. The Indmar TANK HIGH FILL F/W 6.OL - 866102 is a green plastic tank with a hole, perfect for freshwater or supercharged engine applications.
Indmar TANK HIGH FILL F/W 6.OL - 866102
$221.32
The Indmar TANK HIGH FILL INTERCOOLER (866109) is a rectangular white plastic reservoir with black screw cap and short bottom spout, designed for Supercharged 6.2L GM LSA or Ford engines. Brand: Indmar.
Indmar TANK HIGH FILL INTERCOOLER. - 866109
$102.60
A close-up of the Indmar DRAIN PLUG/ANODE INDMAR V-DRIVE (part #495602), featuring a threaded brass and metal hexagonal design, commonly used in plumbing or mechanical systems, isolated on a white background.
Indmar DRAIN PLUG/ANODE INDMAR V-DRIVE - 495602
$68.99
An Indmar COOLER 5" STD w/ORING THREAD - 865003 heat exchanger by Indmar, with green oxidation, yellow-capped threaded ends, and small top fittings, is shown on a plain surface.
Indmar COOLER 5" STD w/ORING THREAD - 865003
$194.92
The Indmar COOLER 9" STD w/ORING THREAD (865004) is a black cylindrical heat exchanger with four pipe connections (two per end), shown against a white background.
Indmar COOLER 9" STD w/ORING THREAD - 865004
$239.88
The Indmar ADAPTER 6.2L FORD 24 PIN TO 16 PIN (2017 - 805914) wiring harness features black connectors, bundled wires in protective tubing, and is ideal for use as an Indmar adapter. Shown resting on a light gray surface.
Indmar ADAPTER 6.2L FORD 24 PIN TO 16 PIN 2017 - 805914
$65.95
An Indmar HARNESS 6.2L FORD INTERCOOLER 575 2017 (805913) automotive wiring harness with multiple connectors and ring terminals is displayed on a light gray surface, featuring durable braided sleeving for protection.
Indmar HARNESS 6.2L FORD INTERCOOLER 575 2017 - 805913
$105.00
Two Indmar PUMP RAW WATER HI FLOW - 685001-4 industrial valves with yellow caps are shown. One has a brass LT1 label for raw water pump use; the other features a black circular base with white and yellow dots around a central hole.
Indmar PUMP RAW WATER HI FLOW - 685001-4
$375.00
Close-up of the Indmar PUMP ASM FORD 6.2L INTERCOOLER (687002) showing its cylindrical motor housing and hose fitting—ideal for Ford 6.2L intercooler systems. Brand: Indmar. The Indmar PUMP ASM FORD 6.2L INTERCOOLER - 687002 is a black cylindrical pump with two nozzles capped with translucent covers and a small side extension, designed for automotive use, shown on a plain white background. Brand: Indmar.
Indmar PUMP ASM FORD 6.2L INTERCOOLER - 687002
$530.07
A close-up photo of the Indmar SENDER TEMP 3/8 NPT THREAD - 645003 sensor by Indmar, showing its hexagonal head and metal washer secured by a nut.
Indmar SENDER TEMP 3/8 NPT THREAD - 645003
$48.58
A digital illustration features the Indmar HOUSING, THERMOSTAT FORD 6.2L - 605905, a teal elbow-shaped part with bolts and attachments, highlighted by technical diagrams and arrows, designed specifically for Indmar Ford 6.2L engines.
Indmar HOUSING, THERMOSTAT FORD 6.2L - 605905
$58.95
Indmar CAP, HEAT EXCHANGER TOP for Ford 6.2L (part #605900): black plastic housing with two cylindrical hose connections and three mounting holes. Often paired with a thermostat housing. Shown on a plain white background.
Indmar CAP, HEAT EXCHANGER TOP FORD 6.2L - 605900
$24.95
The Indmar CAP, HEAT EXCHANGER BOTTOM FORD 6.2L 575 (605903) is a black plastic thermostat housing with two circular openings and two mounting holes, shown on a white background. Compatible with Ford 6.2L engines and Indmar heat exchanger systems.
Indmar CAP, HEAT EXCHANGER BOTTOM FORD 6.2L 575 - 605903
$19.99
A close-up of the Indmar TOOL FUEL PRESSURE ADAPTER 6.2L FORD - 605121FP, featuring a threaded male connection and black plastic knob, designed for 6.2L Ford engines, placed on a gray surface. Brand: Indmar.
Indmar TOOL FUEL PRESSURE ADAPTER 6.2L FORD - 605121FP
$69.99
Close-up of an Indmar TENSIONER ASSEMBLY FORD 6.2 INSIDE PULLEY (597075M) with "Made in China" and other markings engraved on the black component, showing bolts and geometric cutouts.
Indmar TENSIONER ASSEMBLY FORD 6.2 INSIDE PULLEY - 597075M
$129.95
A 3D CAD model of the Indmar MONOVALVE/THROTTLE BODY 6.2L FORD - 597073 assembly by Indmar, featuring cylindrical and rectangular parts with bolts, is displayed on a gray background with technical drawing lines.
Indmar MONOVALVE/THROTTLE BODY 6.2L FORD - 597073
$204.95
The Indmar COVER CAMSHAFT 6.2 FORD Bank 1 (Oil Fill Side) in black features "POWERED BY FORD" embossing and multiple bolt holes. Part number: 597071.
Indmar COVER CAMSHAFT 6.2 FORD Bank 1 (Oil Fill Side) - 597071
$276.80
The Indmar COVER CAMSHAFT 6.2 FORD Bank2 (Cylinder 5-8) Side - 597072 features a black finish with "POWERED BY FORD" embossed on top, designed for 6.2 Ford/Indmar engines with multiple bolt holes and distinct grooves and protrusions.
Indmar COVER CAMSHAFT 6.2 FORD Bank2 (Cylinder 5,6,7,8) Side - 597072
$165.00